The average price for a hydro jet will usually land anywhere between $350 and $600, with more intensive procedures sometimes running up to $1000. You may be curious as to the reason why there would be such a drastic jump in prices, but the answer is relatively simple. Using a steady stream of highly pressurized water, hydro jets are one of the most effective ways to remove a blockage from your sewer line, more so than other common fixes such as snaking a drain or the use of chemicals. Understanding where on the price range the service may fall for you might seem like an intimidating dilemma. To make it easier to calculate, there are a few questions one can ask about the blockage to determine whether or not a hydro jet service will land on the lower or higher end of the price range.
Where is the blockage? Clogs that are closer to the entrance of the pipe will usually be cheaper, whereas issues that are located farther down the line may be pricier. This is due to the fact that the farther away from the entrance the blockage sits, the harder it will be to reach and remove it using the hydro jet. Another question to consider is how hard or soft the contents of the blockage are. Softer clogs will naturally be cheaper to deal with than harder materials. It is due to variables like this that the price of a hydro jet will usually vary drastically depending on a case by case basis.
As you may have realized, hydro jetting can often be expensive, considerably more so than other alternative methods used to deal with a clogged pipe. Although it is true that chemical treatments and snaking are cheaper solutions, neither of these fixes are as thorough and reliable as hydro jetting. While a smaller clog may easily be dealt with using less cost heavy procedures, larger issues may not be resolved using them. In the interest of being cost efficient, it is often better to jump immediately to a hydro jet to fix your issues, as although it is more expensive, it’s a sure fire way to rid you of your clog for good without first draining money on ineffective treatments. Another thing to keep in mind when considering if a hydro jet is right for the job, is that this is not an endeavor you should take on by yourself. While simpler fixes may be easy to do on your own, hydro jets are pieces of complicated equipment best left to the pros to manage.
So, we’ve established that in certain severe cases hydro jets are the way to go. Now the question we must ask is, what would a scenario that requires one look typically like? For a good example, blockages caused by tree roots and similar heavy, solid debris will almost always require treatment with a hydro jet. For obvious reasons, such intensive issues will be next to impossible to resolve with lighter means. Heavier clogs aside, hydro jetting is also better overall for your sewer system, as instead of punching a hole through the blockage it will be able to thoroughly clear away any and all residue be it big or small.