How to Clear A Main Sewer Line Obstruction in Universal City

When you have a blocked drain in your home, your first intuition is most likely to get a plunger. Bit do you know; there are some cases where basic plunging is practically ineffective, like when the main sewer line in your home gets obstructed. When this takes place, you can end up with extensive flooding and pipes problems all over your house.

Steps For How to Clear A Main Sewer Line Blockage

1. Loosen Up the Drain Pipeline Cap (Cleanout Pipe)

The very first step is to find your main drain cleanout area. Search for a little white pipeline that sticks a few inches out of the ground. It is often situated near a flower bed. Use the monkey wrench to loosen the cap. Do it gradually, and permit it to sit for a couple of seconds before eliminating the cap completely. This will help you avoid any abrupt sewage or water spillage. Be ready to step away.

2. Eliminate Cap, Enable Accumulation to Drain

Once you remove the cleanout cap, step away rapidly. The obstruction will most likely have triggered waste to develop. Once you eliminate the cap, it may come spilling out promptly. Permit the pipeline to drain excess water entirely before you try to do anything else. This is where the water resistant boots and gloves will come in convenient!

3. Place the Snake into Pipeline

Once the pipeline has actually finished draining, start carefully feeding the drill into the opening. Ensure to read the guidelines before you begin; each pipe snake will have slightly various guidelines. Augers are common tools used by Arlington drain cleaning professionals. If you do not have one, consider renting from a hardware shop for one-time usage. Feed the drill slowly into the pipe until you reach the blockage. You’ll know you’ve hit it when the snake becomes hard to move. There might be more than one but work your way down.

4. Run the Tool Till Obstruction Is Gone

Run the drill up until you do not feel anymore resistance, and the water accumulation in the pipe is gone. This suggests the obstructed pipe is clear. Continue to run the drill even after the obstruction is gone, as there could still be little clumps of particles after the drain clog has actually cleared or separated.

5. Tidy up

After you are done, leave the auger in the pipeline and hose pipe it down with water. Ensure the nozzle is on full blast and offer whatever a thorough rinse– as this will help clean out any leftover junk that could trigger another blockage. Later, you’ll likewise wish to tube down the pipeline snake before you put it away.

Sewer Main Line Pipe Still Clogged?

If, after following those steps, your primary drain line is still obstructed, you might require to utilize a hydro-jetting service that has more power and the capability to reach the obstruction. It might be time to call a licensed plumbing company to assist.

In some cases, other more serious pipes issues can provide as a sewer backup. If left unattended, they can result in hundreds of dollars of damage down the road. This is much better to prevent with a little expense now for comfort.

If you’re still having difficulty locating your clog or clearing your drain, give us a call today for Main line cleaning in Universal City service.

How to Identify a Sewer Main Line Complication in Universal City
Reasons for an Obstructed Drain Outside of Your House in Universal City