How to Clear A Main Sewer Line Blockage in Palos Verdes Peninsula

When you have a stopped up drain in your home, your very first instinct is most likely to grab a plunger. Little do you know; there are some cases where standard plunging is almost worthless, like when the primary sewer line in your house gets obstructed. When this happens, you can wind up with prevalent flooding and pipes issues all over your home.

Steps For How to Clear A Main Sewer Line Obstruction

1. Loosen Up the Drain Pipe Cap (Cleanout Pipeline)

The primary step is to find your main drain cleanout area. Try to find a small white pipeline that sticks a few inches out of the ground. It is typically situated near a flower bed. Utilize the monkey wrench to loosen up the cap. Do it gradually, and permit it to sit for a couple of seconds prior to removing the cap altogether. This will assist you avoid any sudden sewage or water spillage. Be ready to step away.

2. Eliminate Cap, Permit Accumulation to Drain

When you remove the cleanout cap, step away rapidly. The clog will probably have actually caused waste to build up. Once you eliminate the cap, it may come spilling out rapidly. Permit the pipeline to drain excess water entirely before you attempt to do anything else. This is where the waterproof boots and gloves will be available in helpful!

3. Place the Snake into Pipe

When the pipeline has completed draining, begin carefully feeding the drill into the opening. Make sure to check out the guidelines before you start; each pipe snake will have somewhat different directions. Augers are common tools used by Arlington drain cleaning experts. If you do not have one, think about leasing from a hardware shop for one-time usage. Feed the drill gradually into the pipe till you reach the clog. You’ll know you have actually struck it when the snake becomes tough to move. There might be more than one but work your method down.

4. Run the Tool Till Blockage Is Gone

Run the drill until you do not feel anymore resistance, and the water accumulation in the pipeline is gone. This shows the blocked pipe is clear. Continue to run the drill even after the blockage is gone, as there could still be small clumps of debris after the drain blockage has actually cleared or broken up.

5. Clean Up

After you are done, leave the auger in the pipeline and hose it down with water. Make certain the nozzle is on full blast and provide everything a thorough rinse– as this will help clean out any remaining junk that might cause another obstruction. Later, you’ll also want to pipe down the pipeline snake before you put it away.

Sewer Main Line Pipeline Still Clogged?

If, after following those actions, your primary drain line is still blocked, you may require to utilize a hydro-jetting service that has more power and the capability to reach the blockage. It might be time to call a certified plumbing company to help.

Sometimes, other more serious pipes concerns can present as a sewer backup. If left unattended, they can result in 1000s of dollars of damage down the road. This is much better to prevent with a small expenditure now for peace of mind.

If you’re still having problem locating your blockage or clearing your drain, give us a call today for Main line cleaning in Palos Verdes Peninsula service.

How Frequently Should You Clean Out Your Sewer Line in Palos Verdes Peninsula?