How to Clear A Main Sewer Line Blockage in San Dimas

When you have a stopped up drain in your home, your first intuition is probably to grab a plunger. Little do you know; there are some cases where basic plunging is nearly useless, like when the main sewer line in your home gets clogged. When this occurs, you can end up with widespread flooding and pipes issues all over your home.

Actions For How to Clear A Main Sewer Line Blockage

1. Loosen Up the Drain Pipe Cap (Cleanout Pipe)

The primary step is to discover your primary drain cleanout area. Try to find a small white pipe that sticks a few inches out of the ground. It is frequently located near a flower bed. Utilize the pipe wrench to loosen up the cap. Do it gradually, and enable it to sit for a few seconds before removing the cap entirely. This will help you prevent any abrupt sewage or water spillage. Be ready to step away.

2. Get Rid Of Cap, Allow Build-Up to Drain

Once you remove the cleanout cap, step away rapidly. The clog will probably have triggered waste to develop. As soon as you eliminate the cap, it may come spilling out swiftly. Permit the pipe to drain excess water totally prior to you attempt to do anything else. This is where the water resistant boots and gloves will be available in useful!

3. Insert the Snake into Pipeline

Once the pipe has actually ended up draining pipes, start gently feeding the drill into the opening. Ensure to read the instructions prior to you begin; each pipe snake will have a little different directions. Augers are common tools used by Arlington drain cleaning specialists. If you don’t have one, think about renting from a hardware shop for one-time use. Feed the drill slowly into the pipeline until you reach the clog. You’ll understand you’ve struck it when the snake ends up being tough to move. There might be more than one but work your way down.

4. Run the Tool Till Clog Is Gone

Run the drill up until you do not feel anymore resistance, and the water build-up in the pipe is gone. This suggests the blocked pipeline is clear. Continue to run the drill even after the clog is gone, as there could still be small clumps of debris after the drain obstruction has actually cleared or separated.

5. Clean Up

After you are done, leave the auger in the pipe and hose it down with water. Make certain the nozzle is on full blast and give everything a thorough rinse– as this will assist clear out any leftover junk that might trigger another blockage. Later, you’ll also wish to hose pipe down the pipeline snake before you put it away.

Sewer Main Line Pipeline Still Clogged?

If, after following those actions, your main drain line is still obstructed, you may need to use a hydro-jetting service that has more power and the ability to reach the clog. It might be time to call a licensed plumbing company to assist.

Often, other more serious pipes issues can present as a sewer backup. If left unattended, they can lead to 1000s of dollars of damage down the road. This is better to prevent with a small expenditure now for assurance.

If you’re still having trouble finding your clog or clearing your drain, give us a call today for Main line cleaning in San Dimas service.

Tree Roots and Main line Cleaning in San Dimas