How to Clear A Main Sewer Line Clog in Brea

When you have a clogged up drain in your home, your first reaction is probably to get a plunger. Bit do you know; there are some cases where standard plunging is nearly worthless, like when the primary sewer line in your house gets blocked. When this occurs, you can end up with extensive flooding and plumbing issues all over your home.

Steps For How to Clear A Main Sewer Line Blockage

1. Loosen Up the Drain Pipe Cap (Cleanout Pipe)

The first step is to find your primary drain cleanout place. Try to find a small white pipeline that sticks a couple of inches out of the ground. It is typically located near a flower bed. Utilize the monkey wrench to loosen the cap. Do it slowly, and permit it to sit for a couple of seconds prior to getting rid of the cap totally. This will assist you avoid any abrupt sewage or water spillage. Be ready to step away.

2. Remove Cap, Permit Build-Up to Drain

When you get rid of the cleanout cap, step away rapidly. The blockage will most likely have actually caused waste to build up. As soon as you remove the cap, it may come spilling out quickly. Allow the pipe to drain excess water totally before you try to do anything else. This is where the water resistant boots and gloves will be available in helpful!

3. Place the Snake into Pipeline

When the pipe has actually ended up draining pipes, start gently feeding the drill into the opening. Make certain to read the directions before you start; each pipe snake will have a little various instructions. Augers are common tools used by Arlington drain cleaning experts. If you don’t have one, consider renting from a hardware shop for one-time usage. Feed the drill slowly into the pipe up until you reach the blockage. You’ll know you’ve hit it when the snake becomes difficult to move. There might be more than one however work your way down.

4. Run the Tool Till Obstruction Is Gone

Run the drill until you do not feel anymore resistance, and the water accumulation in the pipe is gone. This suggests the obstructed pipeline is clear. Continue to run the drill even after the clog is gone, as there might still be small clumps of debris after the drain blockage has cleared or broken up.

5. Tidy up

After you are done, leave the auger in the pipeline and tube it down with water. Ensure the nozzle is on full blast and offer everything a thorough rinse– as this will assist clean out any leftover scrap that could trigger another clog. Later, you’ll also want to pipe down the pipeline snake prior to you put it away.

Sewer Main Line Pipe Still Clogged?

If, after following those steps, your main drain line is still blocked, you may need to utilize a hydro-jetting service that has more power and the capability to reach the blockage. It might be time to call a certified plumbing business to assist.

Sometimes, other more severe pipes issues can provide as a sewer backup. If left untreated, they can lead to hundreds of dollars of damage down the road. This is better to avoid with a little expense now for comfort.

If you’re still having problem finding your blockage or clearing your drain, give us a call today for Main line cleaning in Brea service.

Tree Roots and Main line Cleaning in Brea
Factors for an Obstructed Drain Beyond Your Residence in Brea