When you have a clogged drain in your home, your first reaction is probably to grab a plunger. Bit do you understand; there are some cases where basic plunging is practically worthless, like when the main sewer line in your house gets obstructed. When this takes place, you can wind up with widespread flooding and pipes issues all over your home.
1. Loosen the Drain Pipeline Cap (Cleanout Pipeline)
The first step is to find your main drain cleanout location. Try to find a little white pipeline that sticks a few inches out of the ground. It is often situated near a flower bed. Use the pipe wrench to loosen up the cap. Do it gradually, and allow it to sit for a couple of seconds before removing the cap totally. This will help you prevent any sudden sewage or water spillage. Be ready to step away.
2. Remove Cap, Enable Accumulation to Drain
When you eliminate the cleanout cap, step away rapidly. The blockage will probably have caused waste to develop. Once you eliminate the cap, it may come spilling out rapidly. Permit the pipeline to drain excess water totally before you try to do anything else. This is where the water resistant boots and gloves will be available in handy!
3. Insert the Snake into Pipe
Once the pipe has actually completed draining pipes, start carefully feeding the drill into the opening. Ensure to check out the directions prior to you start; each pipe snake will have a little different guidelines. Augers prevail tools used by Arlington drain cleaning professionals. If you do not have one, consider leasing from a hardware store for one-time use. Feed the drill gradually into the pipe until you reach the blockage. You’ll know you’ve hit it when the snake becomes difficult to move. There might be more than one however work your method down.
4. Run the Tool Until Clog Is Gone
Run the drill until you do not feel any more resistance, and the water accumulation in the pipeline is gone. This indicates the blocked pipeline is clear. Continue to run the drill even after the obstruction is gone, as there could still be small clumps of debris after the drain blockage has cleared or separated.
5. Tidy up
After you are done, leave the auger in the pipe and hose it down with water. Ensure the nozzle is on full blast and offer everything an extensive rinse– as this will assist clean out any remaining junk that might cause another clog. Later, you’ll also want to hose down the pipe snake before you put it away.
If, after following those actions, your primary drain line is still obstructed, you might need to use a hydro-jetting service that has more power and the capability to reach the clog. It might be time to call a licensed plumbing company to assist.
Sometimes, other more extreme plumbing concerns can present as a sewer backup. If left without treatment, they can lead to countless dollars of damage down the road. This is better to avoid with a small expense now for comfort.
If you’re still having difficulty finding your blockage or clearing your drain, give us a call today for Main line cleaning in Santa Clarita service.
Main Line Cleaning in Santa Clarita
How Often Should You Clear Out Your Sewer Line in Santa Clarita?