How to Clear A Main Sewer Line Blockage in Tustin

When you have a stopped up drain in your home, your very first instinct is most likely to get a plunger. Little do you understand; there are some cases where basic plunging is almost ineffective, like when the primary sewer line in your house gets obstructed. When this occurs, you can wind up with prevalent flooding and plumbing problems all over your house.

Steps For How to Clear A Main Sewer Line Blockage

1. Loosen Up the Drain Pipe Cap (Cleanout Pipe)

The initial step is to discover your main drain cleanout location. Look for a small white pipe that sticks a few inches out of the ground. It is often located near a flower bed. Utilize the pipe wrench to loosen the cap. Do it gradually, and allow it to sit for a few seconds before getting rid of the cap altogether. This will help you prevent any abrupt sewage or water spillage. Be ready to step away.

2. Eliminate Cap, Permit Accumulation to Drain

Once you eliminate the cleanout cap, step away quickly. The obstruction will probably have triggered waste to build up. Once you get rid of the cap, it may come spilling out rapidly. Permit the pipe to drain excess water entirely prior to you attempt to do anything else. This is where the waterproof boots and gloves will can be found in convenient!

3. Insert the Snake into Pipe

As soon as the pipeline has actually completed draining, start carefully feeding the drill into the opening. Make certain to read the directions before you start; each pipe snake will have slightly different guidelines. Augers are common tools used by Arlington drain cleaning professionals. If you don’t have one, think about renting from a hardware store for one-time usage. Feed the drill slowly into the pipe till you reach the blockage. You’ll know you’ve struck it when the snake ends up being hard to move. There might be more than one however work your method down.

4. Run the Tool Up Until Blockage Is Gone

Run the drill up until you don’t feel anymore resistance, and the water build-up in the pipe is gone. This suggests the blocked pipe is clear. Continue to run the drill even after the blockage is gone, as there might still be little clumps of debris after the drain clog has actually cleared or separated.

5. Tidy up

After you are done, leave the auger in the pipeline and hose it down with water. Make sure the nozzle is on full blast and provide everything an extensive rinse– as this will assist clear out any leftover junk that might trigger another blockage. Later, you’ll also wish to hose pipe down the pipe snake prior to you put it away.

Sewer Main Line Pipeline Still Clogged?

If, after following those actions, your primary drain line is still obstructed, you might require to utilize a hydro-jetting service that has more power and the ability to reach the obstruction. It might be time to call a licensed pipes company to assist.

Sometimes, other more extreme pipes problems can present as a sewer backup. If left without treatment, they can result in thousands of dollars of damage down the road. This is better to prevent with a little expense now for comfort.

If you’re still having difficulty locating your clog or clearing your drain, give us a call today for Main line cleaning in Tustin service.

Main Line Cleaning with Hydro Jetting in Tustin
Reasons for an Obstructed Drain Beyond Your Home in Tustin